Alpina UB-007 Manual De Instrucciones página 4

Warnings
● If you suffer from an illness (e.g. varicose veins, thrombosis, etc.), consult a physician prior to using
the appliance.
● Never use the appliance if you have an open wound, burn, hematoma, swelling or similar condition.
● Stop treatment if it feels uncomfortable to you. Heat-sensitive persons, in particular, should use the
appliance with care, and stop the treatment in a timely manner.
● Never use the appliance on animals.
Attention
● In order to ensure proper functioning of the controls (including the thermostat), do not place them
on top of or underneath the appliance.
● Never use the heated mattress cover while it is folded, bunched up or has raised areas.
3. Placement of the Heated Mattress Cover
Please ensure that the heated mattress cover is lying flat, without folds, bunching or raised areas.
1. Place the heated mattress cover directly onto the mattress, ensuring that it does not extend to
the area where a person
2. Place a fitted sheet over the heated mattress cover. The heated mattress cover must be
completely flat and free of folds, bunching and raised areas.
3. Do not ruck up or bend any components that have electrical wires, a power plug or power cable
located in or on them, and do not push these components underneath the mattress.
This could result in a malfunction of the heated mattress cover, as high temperatures could be
generated, which will trigger the overheating protection of the appliance.
4. You can secure your fitted sheet under the mattress as usual.
Note:
For models with a removable power plug, please attach the plug to the connector of the
heated mattress cover. Please ensure that this connection is performed correctly and that
the plug is securely attached.
Use only original parts!
Do not attach any other control units!
'
s head will be.