Care & Cleaning Instructions - Bella Professional 90018 Manual De Instrucciones

SO-304058_90018_IM r3:Layout 1
CARE & CLEANING INSTRUCTIONS
CAUTION: Never immerse the motor housing, plug or cord in water or any other liquid.
1. Always unplug the unit before cleaning.
2. Whenever possible, rinse parts immediately after processing to make cleanup easier.
CAUTION: Use extreme care when handling the blade assembly. Do not touch the blades
with your fingers. The blades are very sharp and can cause injury if touched.
3. Disassemble Blender. Wash the glass blending jar, lid, measuring cap, blade assembly
and collar in warm soapy water. Rinse and dry thoroughly. Never use rough scouring pads
or abrasive cleansers on any plastic or metal parts as the surface may be damaged.
Do not wash any parts in the dishwasher.
4. If necessary, wipe exterior surface of the motor housing with a moist cloth or sponge
and dry thoroughly.
5. Do not fill the glass blending jar with boiling water or place any of the parts in boiling water.
6. Do not allow the blade assembly to soak in water for long periods of time.
7. For quick clean-ups, the interior of the glass blending jar can be cleaned by using the
PULSE function. Simply add some warm water and a small amount of detergent
into the glass blending jar. Following the OPERATING INSTRUCTIONS described in this manual,
press the OFF/PULSE button and repeat for several short bursts. The unit will clean itself,
without having to handle the sharp blades. Unplug the Blender, disassemble,
rinse and dry thoroughly. Take care as the blades are sharp.
8. Properly reassemble all parts before storing.
All manuals and user guides at all-guides.com
9/4/08 4:57 PM
11
Page 11
Blender