Using The Electric Breast Pump; Electromagnetic Compatibility - Tommee Tippee closer to nature 1063 Instrucciones

USING THE ELECTRIC BREAST PUMP

1. Ensure that the breast pump parts that come into contact of breast or milk has been cleaned or sterilized. Wash your hands before touching
the breast pump or your breasts and avoid touching inside the breast pump or the milk protection pod. Find a comfortable chair where you
can relax.
2. Hold the pump in whichever hand is most comfortable.
3. Place the silicone insert of the horn over your breast, so that it creates a seal all the way round. IF AIR CAN GET IN THERE WILL BE LOW OR
NO SUCTION.
4. Press the on/off button
5. After approximately a minute or so, your breast milk will start flowing freely. At this point, we recommend you press the low expression
button. • The button will light up. This is the slowest expression level for gentle and efficient expression.
6. To increase the expression level, press the medium expression button. • • The button will light up. If expressing is uncomfortable at this level
switch back to the slower level by pressing the lower expression button.
7. If you would like to express faster than the medium expression level, press the high expression button. • • • The button will light up. If
expressing is uncomfortable at this level switch back to medium expression.
8. Adjust expression level accordingly to achieve maximum comfort.
9. Avoid overfilling bottle. Switch off if you express over 5fl.oz/150ml.
10. Once finished pumping, switch off the breast pump and unplug it. You do not need to sterilize your pump parts until you are ready to use it
again.
11. Cover and store the expressed milk for later use.
QUICK START GUIDE
For hygiene reasons this product cannot be returned once opened unless faulty.
WARNING!
• If the supply cord is damaged, it must be replaced by the manufacturer, in order to avoid a hazard.
• Do not immerse motor unit in water or clean with wet sponge or cloth.
• Keep all components out of reach of children.
• Children should be supervised to ensure that they do not play with this appliance.
• Always unplug from electric socket when not in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• The use of accessories, transducers and cables other than those specified with the exception of transducers and cables sold by the
manufacturer of the MODEL1063 as replacement parts for internal components, may result in increased EMISSIONS or decreased
IMMUNITY of the MODEL1063.
• The MODEL1063 should not be used adjacent to or stacked with other equipment.
ELECTRO MAGNETIC COMPATIBILITY
The TT Electric Breast Pump (EBP) complies with the requirements of applicable EMC standards. Other electronic equipment exceeding the
limits defined in such EMC standards, such as mobile telephones & wireless devices, could affect the operation of the device.
MODEL1063 needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information
provided in the ACCOMPANYING DOCUMENTS.
Portable and mobile RF communications equipment can affect MODEL1063.
Adaptor (S01513A)
Input: AC 120V 50/60Hz 100mA
Output: DC 5V 800mA
All manuals and user guides at all-guides.com
to promote milk let-down. This let-down setting is a gentle rhythm to get your milk flowing.