Tommee Tippee closer to nature 1063 Instrucciones página 8

ASSEMBLY OF YOUR NIPPLE AND SCREW RING
• Due to the larger size of Tommee Tippee's nipple and screw ring, care needs to be taken during assembly to ensure that the nipple is
in the correct position (shown below).
• The best method of assembly of the nipple and screw ring is to carefully pull the nipple through the ring in different directions to
ensure the silicone lip fully clips' over the edge of the screw ring. The area where the nipple and screw ring meet should be flush.
STORAGE AND USE
Inspect before each use and pull the feeding nipple in all directions. Throw away at the first signs of damage or weakness. Do not
leave a feeding nipple in direct sunlight or heat, or leave in disinfectant ("sterilizing solution") for longer than recommended, as this may
weaken the nipple. Do not store with or allow to come into contact with solvents or harsh chemicals. Not suitable for use in a grill or a
microwave oven with the grill feature switched on. Keep all components not in use out of reach of children. For safety and hygiene reasons
it is recommended the feeding nipple is replaced at least every 2 months. Do not heat in a microwave. This product is for home use, and is
not suitable for use in the presence of a FLAMMABLE ANAESTHETIC MIXTURE WITH AIR or WITH OXYGEN OR NITROUS OXIDE.
KEEP DRY
Environmental conditions for transport and storage of the unit.
• an ambient temperature of -10°C to +40°C.
• a relative humidity range of 30% to 70%.
• an atmospheric pressure range of 700 hPa to 1060hPa.
KEEP AWAY FROM SUNLIGHT
All manuals and user guides at all-guides.com