Infiniton PG-SA01 Manual De Instrucciones página 31

ASSEMBLY PROCEDURES
1. Assemble the wheel assembly to the
bottom plate. Fix the wheel assembly to the
bottom plate using 4pcs bolt M6X12 and 4pcs
flange nut M6.
Hardware Used
EE
Bolt M6 X 12
FF
M6 Flange nut
II
Wrench
2-1. Unscrew the switch button, load small
battery, tighten the switch button.
2-2. Insert the pins of the base to the holes of
lower support, press to secure the pins. Using
4pcs screw M5X12 to secure the lower support
and base.
Insert the pins of the control box assy to the
holes of upper support, press to secure the
pins. Using 4pcs screw
the upper support and control box assy.
Hardware Used
GG
Screw M5 X 12
DD
3/16" Screw
Philips
JJ
screwdriver
x 4
x 4
x 1
3/16" screw to secure
x 4
x 4
x 1
1
EE
M
FF
2
OO
AA Battery (1.5 V)
J
K
DD
GG
- 8 -