Jeep JE-MX27.5+ Manual De Instrucciones página 10

USB port
USB port on the bottom side of the display can be used for charging a device (a mobile phone for example).
Be careful if you use the USB port during the ride.
Do not use the USB connection to listen to music with earphones whilst riding the bike!
Push-assistance Mode
To activate the push-assistance mode, keep pressed the "-" button for 2 seconds.
The display must be turned-on already.
The bike will enter into 6km push-assistance mode
The display will show the relative indicator.
The bike will move forward.
The push-assistance mode may only be used when the user needs to push by hand the bike.
Danger of injury when the wheels of the eBike do not have ground contact while using the push-assistance
function.
Pay attention when using this function.
The push-assistance function switches off as soon as you release the "-" button.
Pay attention when using this function.
10