Health Zenith Secure Home SH-5105 Manual De Instrucciones

Motion Sensor
Light Control
Model SH-5105
• DualZone™ Technology.
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• D B
ual rite
• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).
This package includes:
Bulb
Holders
Cover
Plate
Mounting Bolt
2 Shells
© 2008 HeathCo LLC
Get user manuals: See SafeManuals.com
Meets the ENERGY STAR
when D B function is off and
®
ual rite
ON-TIME is 1 or 5 minutes and when
used with 120 W Max bulbs.
Features
Timer.
®
Plastic Hanger
Sensor
Light Control
Mounting Strap
6 Screws
(3 sizes included)
• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
• Some codes require installation by a qualified
electrician.
• This product is intended for use with the enclosed
gasket and with a junction box marked for use in wet
locations.
Mode:
® guidelines
Test
Auto
Manual
Accent
Note: When first turned on wait about 1
the circuitry to calibrate.
Put ON-TIME switch
on the sensor bottom
to TEST and the D
B
®
rite
Put the ON-TIME switch in the 1, 5,
Rubber Plug
or 20 minute position.
Manual mode only works at night
because daylight returns the sensor
2 Wire
to AUTO.
Connectors
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 20
Gasket
position.
Requirements
OPERATION
On-Time Works: Day Night
5 Seconds
1, 5, or 20 Min
To Dawn*
3, 6 Hr, to Dawn
* resets to Auto Mode at dawn.
TEST
ON-TIME
-
ual
TEST 1 5 20
switch OFF.
AUTO
MANUAL MODE
x x
x
x
x
/ minutes for
1
2
D B
®
ual rite
Off 3 6 Dusk to
Dawn
ON-TIME
TEST 1 5 20
1 Second OFF
then...
... back on.
598-1152-03