Assembly Instruction - Thomasville SPLS-BRBK-TV Instrucciones De Montaje

Metal tabs
face upward
NOTE: DO NOT fully tighten all bolts until you finish assembling all parts. Once assembled, go back
and fully tighten all the bolts.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Attach the Bottom Frame (F) to the Bottom Panel (C) with six 32mm Screws (3).
3. Insert two 15mm Bolts (1) through the metal tabs on the Bottom Frame (F) and screw into the Right Side
Frame (E) and fasten them in place using the hex wrench provided.

Assembly Instruction

3
3
F
3
1
C
1
F
5
3
3
3
C
E