3.4. Once you have finished using the appliance:
3.4.1. Select the minimum position "MIN" using
the thermostat control.
3.4.2. Allow appliance to cool down.
3.4.3. Unplug the appliance from the mains
power supply.
3.4.4. Clean the appliance as described in the
cleaning section.
4. Cleaning
4.1. Disconnect the appliance from the mains
power supply and allow it to cool completely
before undertaking any cleaning task.
4.2. Clean the drip tray with a damp cloth and
dry.
4.3. Clean the outer parts of the appliance with a
damp cloth with a few drops of washing-up liquid
and then dry. CAUTION! Do not immerse electri-
cal parts of the appliance in any liquid.
4.4. Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
4.5. Never submerge the appliance in water or
any other liquid or place it under running water.
5. Anomalies and repair
5.1. Take the appliance to an authorised support
centre if product is damaged or other problems
arise.
5.2. If the connection to the mains has been
damaged, it must be replaced and you should
proceed as you would in the case of damage.