OPERATION
Quick Start
Caution!
• Before washing, please make sure the washing machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it's recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
Calibration
It's recommended to calibrate the washing machine, so that provide the best
performance.
The appliance is able to detect the amount of laundry loaded. This function is
optimizing the product performance by minimizing energy and water
consumption, saving you money and time. For this reason it's recommended to
calibrate the appliance for best use.
1- Remove all accessories from the drum and close the door;
2- Insert the mains plug to the socket;
3- Switch on the washing machine and press "Delay" and "Temp."
simultaneously for 10 seconds until "t19" is displayed;
4- Press [
] to start the appliance and wait till "****" is displayed.
10 13