Tabla De Contenido; Cam Lock System Operation - allen+roth LWS44PSD Manual De Instrucciones

TABLE OF CONTENTS
Cam lock System Operation............................................................................................... 2
Package Contents............................................................................................................... 3
Hardware Contents...............................................................................................................4
Safety Information............................................................................................................... 5
Preparation ......................................................................................................................... 5
Assembly Instructions.......................................................................................................... 6
Care and Maintenance ....................................................................................................... 11
Limited Lifetime Warranty.................................................................................................. 11
Replacement Parts List ................................................................................................... 12

CAM LOCK SYSTEM OPERATION

DETAIL A
THREADED
INSERT
1. Screw cam bolts into the predrilled small holes on panel.
2. Insert cam lock into predrilled large hole on panel.
3. Make sure the arrow on the cam lock is pointed toward the cam bolts.
4. Connect both panels together, making sure cam bolts goes into predrilled hole on
the end of panel with cam lock.
5. Once cam bolts is connected inside cam lock, take Phillips screwdriver and tighten
cam lock clockwise.
CAM LOCK
Cam Bolts
PANEL
DETAIL B
2
LOCKED POSITION
PANEL