Assembly/Disassembly; Transport And Storage - Vermeiren Bretagne Manual De Instrucciones

2.4

Assembly/Disassembly

Upon delivery of the comfort chair, the seat and backrest have to be installed before use. The
seat and backrest can also be removed for easy transport.
2.4.1 Backrest
1. Place the backrest tubes over the frame tubes.
2. Press the spring button (1) to slide the backrest down.
3. Push the backrest all the way down until it is secured into place.
To remove the backrest, press the spring button beneath the upholstery
and pull the backrest upwards until it detaches from the frame.
2.4.2 Seat
1. Place the hooks on the rear side of the seat over the frame tube close to the backrest.
2. Push down on the front side of the seat to fix it into place. You will hear a click.
To remove the seat, pull of the front of the seat until it detaches from the frame.
2.5

Transport and storage

CAUTION
• Pay attention when passing with the chair through narrow passages.
• Make sure the passage is clear from objects, obstacles and persons.
2.5.1 Moving aside
1. Check that the brakes of the comfort chair are engaged (only for Bretagne with wheels, see
§3.3).
2. Transfer the patient out the chair.
3. Disengage the brakes (only for Bretagne with wheels).
Place the backrest into the upright position.
4.
5. Transport the chair to the desired place on a horizontal underground.
a) With wheels: Move the comfort chair by using its wheels and roll it to its destination.
b) Without wheels: Ask help to lift the chair with two persons. Firmly grasp the frame with
both hands and lift it from the floor. Do not use leg rest(s), armrests, wheels or seat to
grasp the chair.
6. Engage the brakes (only for Bretagne with wheels).
2.5.2 Storage
CAUTION
Make sure that your comfort chair is stored dry to prevent mould from growing and the upholstery
from being damaged, see also technical details in §5.
Risk of injuries and damage
Risk of damage
5
EN
Bretagne
2022-06
Before use
NL
1