Safety Precautions - Mitsubishi SC-SL2NA-E Manual De Instalación

Ocultar thumbs

Contenido

página de 46

/ 46
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

CENTRAL CONTROL SC-SL2NA-E

Please be sure to read this manual carefully and follow it before installation work.

Please refer to indoor unit and outdoor unit installation manual together for installation work.

The appliance must be installed in accordance with national wiring regulations.

The product is precision equipment, so please handle it with enough care to prevent the unit damage due to falling and being stepped on.

Before touching the terminal block, turn off the power supply.

Please read this "Safety Precautions" for Installation work and follow it properly.

Safety Precautions are divided into "Warning

WARNING : Wrong installations may cause serious consequences such as serious injuries or death.

CAUTION : Wrong installations may cause serious consequences depending on circumstances.

Please be sure to follow the instruction.

After the installation, please make a test run and confirm no abnormalities occurs during the test run. Please explain the operation

method to the customers according to the user's manual. Please request the customers to keep this Installation manual.

Please consign the installation work to the dealer or professional installer. Self-installation may cause incomplete work, electric

shock and resultant fire.

Please install the unit properly according to the installation manual. Incomplete installation may cause electric shock and

resultant fire.

Please be sure to only use attached accessories and specified parts for the installation work, or it may cause electric shock and

resultant fire.

The electrical work should be performed by qualified electrical engineer, according to <Electrical Standards>, <Local electrical

safety regulations> and wiring specification. Incomplete installation work may cause electric shock and resultant fire.

When wiring, ensure solid connection and fasten specified cables securely so that terminal connections may not be subject to

external force working on cables. Incomplete connection for terminal wiring may cause electric shock and resultant fire.

Please perform grounding work.

Please do not connect the ground wire with gas pipes, water pipes, lightning rod and telephone ground wire.

Incomplete grounding work may cause the electric shock.

Please do not install the central control at the following places.

1. Oil fog filled place, oil spraying and steamy location such as kitchen, etc.

2. The place where corrosive gas such as sulfur dioxide generates.

3. The location with the machine that generates radio wave.

It may cause abnormality in the control system and abnormal running.

4. The location at the risk of flammable gas leaking.

The place where exists volatile catching fire thing such as paint thinner and gasoline.

By any chance the gas leaks and it accumulates around the equipment, it may cause ignition.

Applicable Models

Accessories

1Central control

Use the Electrical box for installation.

Please prepare on site.

INSTALLATION MANUAL