Speedlink Medusa 5.1 Manual Del Usuario página 8

When you don't want to connect a system to the amplifier:
GB
1. Connect cable C to your DVD player and the other end to cable A.
D
2. Connect cable A to your amplifier box.
F
fig. 2
E
I
Connecting the headset to your PC's sound card
1. Connect cable A to the sound output of your sound card as shown in fig. 3.
2. Connect the other end of cable A to the "5.1 Ch Audio Input" socket on the
back of the amplifier box.
3. Use the original cable of your connected hi-fi system and connect it to
the "5.1 Ch Audio Output" socket on the back of the amplifier box and the
other end to the sound input of your loudspeaker system (see fig. 3)
4. Insert the 9-pin plug of the headset into one of the two sockets on the front of
the amplifier box.
Note: In order to extend microphone cable, just connect cable E (see page 2) to
the 3.5mm jack of the microphone cable and connect the other end of cable E to
sound card input.
8
fig. 3