Technical Specifications - Speedlink Medusa 5.1 Manual Del Usuario

Connecting the headset to a CD player, etc.
1. Connect the 9-pin connector of the headset to the 9-pin socket of cable D.
2. Connect the 3.5 mm jack plug of cable D to the required sound source
(e.g. CD player).
3. Slide the switch on the cable remote control from the "DVD" to the "CD"
position.
fig. 4
Connecting the microphone to the PC
1. Connect the 3.5 mm jack plug of the headset to your sound card.
fig. 5

Technical specifications

Amplifier box:
Power supply: 7.5 V DC /500 mA
Output power: 500 mW x 6
Signal/noise (S/N): - 60 dB
Distortion: <0.5%
9
GB
D
F
E
I