Pre-Operation Check - MADER MQ170GS Manual De Instrucciones

(9) SHIFT LEVEL (18) CLUTCH CONTROL LINE

PRE-OPERATION CHECK

1. Engine oil
CAUTION：
Running the engine with low oil level will cause serious engine damage.
1. Remove the oil filler cap and wipe the dipstick clean.
2. Insert the dipstick into the oil filler neck but do not screw it in.
3. If the level is low, fill the recommended oil to the top of the oil filler neck.
Use high-detergent, premium quality 4-stroke engine oil, certified to meet or exceed
U.S. automobile manufacturer's requirement for API Service Classification SG.SF
Using non-detergent oil or 2-stroke engine oil could shorten the engine's
CAUTION:
service life.
SAE 10W-30 is recommended for general all-temperature use. Other viscosities shown
in the following chart might be used when at the average temperature in your area is
within the indicated range.
(1) OIL FILLER HOLE
(2) UPPER LEVEL
(3) LOWER LEVEL
Ambient Temperature
10