Detergent Use - cecotec BOLERO AGUAZERO 6600 Manual De Instrucciones

ENGLISH
Water hardness table
Level Germany water
hardness level (°dH)
1 0-5
2 6-11
3 12-17
4 18-22
5 23-31
6 32-50
Setting the water softener
Turn on the dishwasher by pressing the power button.
1.
Hold down the programme button for 3 seconds until the display shows 'SL'. It will then
2.
show the last setting level.
Press the programme button to select the desired level.
3.
Press the power button to save settings.
4.

4.3 Detergent use

Use only detergents designed specifically for household dishwashers. Keep the detergent
-
in a cool, dry place and out of reach from children.
The ingredients used in the detergents are necessary to remove dirt from the dishwasher.
-
Do not fill the compartment with powder detergent until it is ready to wash the tableware.
-
The necessary detergent amount will depend on the cycle, the load size and the dishes dirt
-
level. Add an adequate amount to ensure optimum performance.
If the detergent amount is too high, you will notice glass and dishes have whitish stripes
-
or bluish layers, which may rust the tableware. Continued use of too much detergent may
cause damage to the dishwasher.
If the amount of detergent is too low, it can cause bad cleaning, as well as whitish stripes
-
if the water is hard.
Check the manufacturer instructions for the detergent to get more information.
-
Filling the detergent dispenser
Fig. 7
Push the tab to open the dispenser and pour the detergent.
1.
Close the cover and push it until it is fixed in its place. You must refill the dispenser just
2.
before starting each programme.
64
France water
hardness level
(°dF)
0-9
10-20
21-30
31-40
41-55
56-90
United Kingdom water
hardness level (°dE)
0-6
7-14
15-21
22-28
29-39
40-63
Indicator on
the display
L1
L2
L3
L4
L5
L6