Alpina YH-40R-0 Manual De Instrucciones página 6

CAUTION: THE FAN MUST NOT BE CONNECTED TO THE
ELECTRICAL MAINS SUPPLY DURING ASSEMBLY.
OPERATING INSTRUCTIONS
Speed Light
Connect the power plug to a suitable outlet. Turn on the fan by
pressing the "ON/SPEED" on the control panel or remote
control.
1. Speed control: Select the desired speed by pressing the
"ON/SPEED" on the control panel or remote control. (Speed
Light: HI – High, MI – Middle, LO – Low)
2. Timer: Select the desired timer (0.5 / 1.0 / 1.5 / 2.0...7.5hrs) by
pressing the "TIMER" on the control panel or remote control.
3. Mode: Select the Normal or Sleep mode by pressing the
"MODE" on the control panel or remote control.
Timer Light
Mode Light
NOR: Normal/SLP: Sleep