EIBENSTOCK EHM 162 S Instrucciones De Servicio página 11

Specifications
Stirrer EHM 162 S
Rated voltage:
Rated power input:
Frequency:
No Load Speed:
Load Speed:
Max. basket diameter:
Thread connection:
Protection class:
Degree of protection:
Net weight:
Order number:
Interference suppression:
Available accessories:
Helicon Ribbon Stirring Rod WG 160
Mortar Stirring Rod MG160
Mortar Stirring Rod MG 180
Disc Stirring Rod SG 150
Mixing Paddle RPG 160
... with M 14 thread connection
Stirrer with stirring rod and operating instructions in a set box
Application for Intended Purpose
The Stirrer EHM 162 S is designed for use in mixing material of high
viscosity, such as prefab mortar and plaster, cement, lime, concrete, quartz-
filled epoxy resins, screed, pastes, sealing compounds as well as gypsum
and granulates in batches up to 80 kg.
The diameter of the used stirring rods should not exceed 180 mm.
Safety Instructions
Safe work with the machine is only possible, if you read
these operating instructions completely and strictly
follow the instructions contained herein. In addition, the
general safety instructions in the enclosed brochure have
to be observed. Take part in a practical introduction
before the first use. Save all warnings and instructions for
future reference.
Item
Supply
EN 55014 and EN 61000
11
230 V ~
2000 W
50 / 60 Hz
0 - 800 rpm
0 – 430 rpm
180 mm
M 14
II
IP 20
about. 6,0 kg
07779000
Order no.
31227000
31327000
31328000
31527000
31437000