Safety Instructions - EIBENSTOCK EHR 20 S SET Instrucciones De Servicio

Safety Instructions

Safe work with the machine is only possible if you read
this operating instruction and the safety instructions
completely and follow the instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training. Save all
warnings and instructions for future reference.
If the connection cable gets damaged or cut during the use,
do not touch it, but instantly pull the plug out of the socket.
Never use the tool with a damaged connection cable.
The tool must neither be wet nor used in humid environment.
Do not use the tool near explosive materials (petrol, dilution).

Do not mix food.

Modifications of the tool are prohibited.

Always check the tool, cable and plug before use.

repaired by specialists. Only insert the plug into the socket when the tool
switch is off.
When the machine runs outside, always use a protection switch

(30 mA max.) against fault current.
Pull the plug and switch the machine off if it is not under supervision, e. g. in

case of setting up and stripping down the machine, in case of voltage drop or
when fixing or mounting an accessory.
Switch the machine off if it stops for whatever reason. This way, you avoid

that it starts suddenly and not under supervision.
Do not use the machine if one part of the housing is damaged or in case of

damages on the switch, cable or plug.
Electric tools have to be inspected by a specialist in regular intervals.

Do not touch rotating parts.

Persons under 16 years of age are not allowed to use the tool.

Before starting up, check that the mixing rod is securely attached and

rotates without a hitch.
Do not reach into the mixing container with your hands or insert any other

objects into it while mixing is in progress. Risk of crushing!
Wait until the machine or tool comes to a complete standstill. Rotating tools

can snag and cause injuries or damage.
The mixing container must be suitable for mixing and must stand securely. A

container that is not properly secured may move uncontrolled.
Ensure that no liquid splashes against the housing of the power tool. Liquid

that has penetrated the power tool can cause damage and lead to electric
shock.
Follow the instructions and warnings in the Material Safety Data Sheets

(MSDS) of the material to be mixed. Material to be mixed may be harmful.
12
Have damages only