Cleaning And Maintenance - cecotec BOLERO DRESSCODE DRY 8500 Manual De Instrucciones

ENGLISH
IMPORTANT: If you do not remove the laundry once the programme ends, the Anti-
crease option will be automatically activated for 1 hour. This option spins the drum at
regular intervals to prevent creases.
Information on the drum light
- This product includes a LED light on the drum. The light turns on automatically when you
open the door. It turns off automatically after some time.
- This is not an adjustable option for the user to activate or deactivate it.
- Please, do not try to replace or substitute the LED light.
PROGRAMMES
Dry Delay Buzzer
Target Start warning
mute
Cotton √ √ √
Synthetics √ √ √
Delicate √ √ √
Mix √ √ √
Towels √ √ √
Hygiene √ √ √
Drying Time X √ √
Baby Care √ √ √
Duvet √ √ √
Extra Silent √ √ √
Outdoor √ √ √
Wool X √ √
Refresh X √ √
Express 45' √ √ √
Shirts 30' √ √ √
X Not available
√ Available
142
OPTIONS
Child Delicate Dry Dry Anti-
lock dry Time Level crease
√ √ X √ √
√ √ X √ √
√ √ X X √
√ √ X √ √
√ √ X √ √
√ √ X √ √
√ X √ X √
√ √ X √ √
√ √ X X √
√ √ X X √
√ √ X √ √
√ X X X √
√ X √ X √
√ X X X √
√ X X X √
ATTENTION: The Delicate and Dry Level options are not available at once in any of the
programmes.
Machine sound
Pump sound
Fig. 7
The pump is activated when the machine starts running and during operation at certain
intervals. Hearing the sound of the pump and water is usual during this process.
Compressor sound
Fig. 8
Hearing a metallic sound from the compressor from time to time while the machine is running
Spin
is usual.

6. CLEANING AND MAINTENANCE

√
√
IMPORTANT: Do not use industrial chemical products to clean the dryer. Do not use a
√
dryer which has been cleaned with industrial chemical products.
√
Lint filter cleaning
√
IMPORTANT: REMEMBER TO CLEAN THE LINT FILTER AFTER EVERY USE.
√
How to clean the lint filters
X
Fig. 9
1. Open the loading door.
√
2. Pull the lint filters upwards to remove them.
√
3. Open the exterior filter.
√
4. Clean the exterior filter with your hands or with a soft cloth.
5. Open the interior filter.
√
6. Clean the interior filter with your hands or with a soft cloth.
X
7. Close the filters and place the hooks.
8. Place the interior filter inside the exterior filter.
X
9. Place the lint filters again in its place.
X
- After using the dryer for a certain period of time, if you find a layer which can block the filter
X
surface, wash the filter with warm water to remove the layer.
- Dry the filter thoroughly before installing it again. Fig. 10
ENGLISH
DRESSCODE DRY 8500
143
DRESSCODE DRY 8500 DARK
DRESSCODE DRY 9500