cecotec BOLERO DRESSCODE DRY 8500 Manual De Instrucciones página 74

ENGLISH
The laundry is moist after the
The laundry which is hot after the drying process is
drying process.
usually moister.
The programme used may
not be suitable for the type of
laundry.
The lint filter surface may be
blocked.
The heat exchanger may be
blocked.
The dryer may be overloaded
with laundry.
The laundry might be
insufficiently spin-dried.
The dryer cannot be opened The dryer may not be plugged
or the programme cannot be in.
started. The dryer does not
The loading door may be
start when it is set.
open.
You may have not selected a
programme or you may not
have pressed the Start/Pause
button.
The child lock may be active
(depending on the model).
The programme has been The loading door may not be
interrupted for no reason. properly closed.
There may have been a power
cut.
The water tank may be full.
Clothes have shrunk, become The programme used may
compacted or deteriorated. not be suitable for the type of
laundry.
146
Check the care labels on the
laundry, select a suitable
programme for the type of
laundry and use the time
programmes.
Wash the filters with warm
water.
Clean the heat exchanger.
Do not overload the dryer.
Select a higher spin speed.
Make sure that the plug is
inserted into the socket.
Make sure the loading door is
properly closed.
Make sure you have selected
the programme and the dryer
is not in the standby mode.
Disable the child lock.
Make sure the loading door is
properly closed.
Press the Start/Pause button
to start the programme.
Empty the water tank.
Check the care labels on the
laundry and select a suitable
programme for the type of
laundry.
Water leakage on the loading There may be accumulated
door. lint
in the interior surface of the
loading door and in the
sealing
surface of the loading door.
The loading door opens by The door may
itself. not be properly closed.
The warning symbol of the The water tank may be
water tank is on/ full.
flashing.
The drain hose
may be bent.
The warning symbol of the The heat exchanger may
heat exchanger cleaning be dirty.
is on.
The warning symbol of the The lint filters may be dirty.
filter cleaning is on.
The filter base may be
blocked by lint.
There may be a layer blocking
the surface of the lint filters.
The filter and heat exchanger The filter base may be
cleaning warning symbols are blocked by lint.
flashing.
There may be a layer blocking
the surface of the lint filters.
The heat exchanger may be
blocked.
The programme cannot start The filter cannot be placed.
and the filter warning LED is
The filter warning LED is
flashing.
flashing even though the filter
is placed.
Automatic error warnings
Your dryer is equipped with a built-in fault detection system, indicated by a combination of
flashing operating lights. Next, you can find the most common error codes.
ENGLISH
Clean the interior surface of
the
loading door and the sealing
surface of the loading door.
Push the loading door until
you hear the closing sound.
Empty the water tank.
If the product is connected
directly to a water outlet
check the drain hose.
water level.
Clean the heat exchanger.
Clean the filters.
Clean the filter base.
Wash the filters with warm
water.
Clean the filter base.
Wash the filters with warm
water.
Clean the heat exchanger.
Replace the filter.
Contact the Technical Support
Service.
DRESSCODE DRY 8500
147
DRESSCODE DRY 8500 DARK
DRESSCODE DRY 9500