imilab C21 Manual De Instrucciones página 5

3. Make sure to position the base unit so that the arrow
is pointing up. Secure the base unit in place by tightening
the screws into the plastic anchors.
4. Matching the grooves on the bottom of the camera
unit with the raised area on the base unit. Press down
until the two surfaces are flush, then turn the camera unit
in either direction to lock it in position.
Warning:
To avoid any damages or injuries, the device must be securely fastened to the
floor/wall as specified in the installation instructions.
When mounting the security camera on a wall:
Please note that the wall must be able to support at least triple the product's total
weight.
EN-03