imilab C20 Pro Manual Del Usuario página 4

Installation
IMILAB C20 Pro can be placed on a number of horizontal surfaces, such as a writing
desk, dining table, and co ee table. It can also be mounted on the wall.
Mounted IMILAB C20 Pro on a Wall:
1. Drill two holes on the wall by using the base of the IMILAB C20 Pro as a template.
It is recommended that you mark the locations of the hole with a pencil before
drilling. The diameter of each hole is approximately 6 mm, and the depth is
approximately 30 mm.
2. Insert the two plastic anchors into the holes on the wall.
EN-02