Maintenance And Cleaning - DAYRON 26114 Manual De Usuario

• Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
• Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
• Stand the appliance on a table or flat surface.
• The item must not be left unattended when it is connected to main supply.
• The item is not to be used, if it has been dropped & if there are visible signs of
damage or if it is leaking.
• Never modify the appliance in anyway.
• Do not use or keep this product outside when it is raining.
• Certain parts of the appliance can get hot. Do not touch them, as you may burn
yourself.
• Place the bread slices in the slot (for the French bread, cut a loaf shorter than
the slot, then cut it in two pieces along its length.). Your appliance is provided
to receive French bread, but also pieces of toast or other bread slices if their
thickness and their length are shorter than the slot.
• Press down the bread carriage handle until it stops (in the same time, the grid
inside the slot will tighten around the bread in order to keep it away from the
heating wires). Then release the pressure and the handle will stay in the lower
position, which means that the heating process has begun. If the handle
comes up immediately, check if the appliance is plugged in as it blocks when
the unit is plugged in.
• You can adjust the browning intensity to obtain a more or less toasted bread by
positioning the browning control selector to one of the degrees marked from 1
to 6. Therefore you only have to turn clockwise to increase the intensity, and
anticlockwise to decrease it. The higher the number is, the more toasted the
bread will be.
• When you use the burn warmer on the toaster, you need select the browning
control below 2.
To use complementary functions :
After pressing down the bread carriage handle, push on :
- The reheat button which allows you to reheat bread or to toasted bread.
- The defrost button which allows you to toast the bread that has been frozen
beforehand.
• During the functioning, if you think that the bread is toasted enough or for
another reason, you can break the heating process, simply by pressing the
cancel button "STOP".
• Always unplug the appliance after use and let it cool down before handling or
storing it.
AW_26114_Userguide_VO1_2020

MAINTENANCE AND CLEANING

17