Lenco LBT-188 Manual De Usuario página 17

 Lower tone arm on USB turntable onto album and track you want to
record.
 Click on the blue Pause button to pause the recording. Press it again to
continue.
 Click on the yellow Stop button.
That's it. You can now play around with your recording and explore the
editing capabilities of Audacity. Remember that you can use the Undo
function almost without limits while the project is open.
NOTE: CD's cannot be burned directly from the Audacity application. Other CD
burning applications should be used.
Maintenance and Cleaning
Your turntable requires little of no regular maintenance. Remove dust with a
slightly damp antistatic cloth. Never use a dry cloth, this will create static
electricity and attract more dust! Antistatic cleaning agents are available at
specialist stores, but must be applied sparingly to avoid damage to rubber
parts. It is recommended to install the needle cover before cleaning or
maintenance is carried out to avoid damage.
If the turntable is not used over a long period of time, the drive belt should
be removed to prevent unequal stretching.
NOTE: Always disconnect the record player from the power supply as a
precaution before maintenance!
16