Efapel D40 Manual Del Usuario página 21

PAIRING OF THE DEVICES THAT ARE ALREADY IN A NETWORK -
ƒ ON THE TRANSMITTER DEVICE
1 STEP
ST
Click on PROG
(programming).
2 STEP
ND
According to
button you wish to
pair, click A, B, C or
D to start PAIRING.
the
ONLINE
1.1 - The LED A
switches on, indi-
cating that you can
start the PAIRING.
2.1 - The LED A
continues to blink
and all the devices
in the network blink
as well.
Note: In the case of battery
powered devices (Ref. 40227),
the LED does not blink in or-
der to extend the battery's life.
21