Latching The Cooler Lid; Setting The Temperature; Switching Off The Cooler; Defrosting The Cooler - Mobicool MCG 15 Instrucciones De Uso

Operation
6.6

Latching the cooler lid

➤ Lift the latch (fig. 1, page 3) and close the lid.
➤ Release the latch.
✔ The latch audibly clicks in place and secures the cooling device lid.
6.7

Setting the temperature

➤ To unlock the buttons press the
✔ A beeping sound confirms the unlocking.
➤ To enter setting mode press the
➤ To enter temperature settings press the
➤ Use the "+" (fig. 2 3, page 3) and "–" (fig. 2 5, page 3) buttons to select
the cooling temperature.
✔ The set temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
6.8

Switching off the cooler

➤ Empty the cooler.
➤ Switch the cooler off.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the lid slightly open. This prevents odor build-up.
6.9

Defrosting the cooler

Humidity can form frost in the interior of the cooling device or on the evapora-
tor. This reduces the cooling capacity.
A
NOTICE! Damage hazard
Failure to obey this instruction may result in damage to the device.
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
14
button for 3 seconds(fig. 2 4, page 3).
button once.
button once.
MCG15
EN