Operation; Energy Saving Tips; Using The Cooler - Mobicool P40 DC/AC Instrucciones De Uso

_P40_W40.book Seite 9 Donnerstag, 2. Dezember 2010 1:55 13
P40, W40
5

Operation

Note
I
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and mainte-
nance" on page 10).
5.1

Energy saving tips

Choose a well ventilated installation location which is protected against
direct sunlight.
Allow warm food to cool down first before placing it in the device to keep
cool.
Do not open the cooling device more often than necessary.
Do not leave the cooler unit open for longer than necessary.
5.2

Using the cooler

Note
I
Like every cooling device, your cooler must be properly ventilated
so that any heat created can dissipate. Otherwise proper function-
ing cannot be ensured.
➤ Place the cooler on a firm base.
➤ Connect the DC connection cable (fig. 1 2, page 3) to the cigarette light-
er or a DC plug socket in the vehicle.
or ...
➤ Connect the 230 V connection cable (fig. 1 3, page 3) to the 230 V AC
mains supply.
Note
I
Close the box tightly by pushing down the lid.
✓ The cooler starts cooling the interior.
Operation
9