Reset; Error Code; Bowl Illumination - Graef KM7016 Manual De Instrucciones

Time and speed are pre-set and cannot be adjusted.
To start the function, press the start/stop button.
●
After expiration of the time, the unit will stop.
●
"END" appears on the display.
●
Press the start/stop button to return to the standard display.
●
IMPORTANT!
If you have accidentally selected on of the programmes, touch the respective symbol again
in order to return to the standard display.
Manually or via the time setting and speed level
Touch on the time display. By turning the rotary wheel, you set the minutes and seconds (max-
imum 30 minutes). To set the speed, touch on the speed display and turn the rotary wheel. The
press the start/stop button.
Note: During preparation you can adjust the speed by turning the rotary wheel.
Manual
Press the Start/Stop button.
●
The unit starts on speed level 1.
●
Now you can adjust the speed by turning the rotary wheel.
●
To end the process, press the start/stop button again.
●
Switch the unit off after use and pull the power cord. Now you clean the unit.
IMPORTANT!
The maximum operating time is 30 minutes under heavy load (e.g. producing firm dough). For
smaller loads (e.g. whipping cream), the unit can also be used for a longer time. The unit must
then cool down for at least 1 hour.

RESET

To reset the automatic programmes or the manually set time and speed, press and hold the
●
start/stop button for 3 seconds.

ERROR CODE

E03 = the stirring arm is still open.
IMPORTANT!
When the cover for the connection of the optional accessory has not been properly inserted,
the unit cannot be started.

BOWL ILLUMINATION

The food processor has a bowl illumination. If this is defective, it can be removed with commer-
cial tools.
Remove the power plug.
●
24