Important Safeguards - Artlii Play3 RD-835 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23

Important Safeguards

Installation
•For best results, please use the product in a dark room or by
drawing a curtain.
•Please be careful to use it. Falling or striking may damage parts
or cause blurred image or abnormal display.
Power cord
•Be careful to use the power cord and avoid it being bent
excessively; the damage of the power cord may cause
electric shock or fire.
•Unplug the power cord out from the power socket after
using it.
Cleaning
Unplug the power cord first.
•Clean the product shell with wet cloth regularly, and use neutral
detergent allowably; do not use any strong detergent or solvent
(such as ethanol or diluent).
•Wipe the lens with glasses cloth or lens paper; be careful not to
scratch or bruise the lens.
•Clean the air vent and loudspeaker of the product by using a
banister brush regularly; otherwise, the air vent will be blocked
by dust to make the product overheat, thereby causing product
malfunction.
Caution about high temperature
•The air vent may become hot during or after projection; if you
touch it by hands at the moment, you may be scalded.
•Do not look at the lens straightly; otherwise, your eyes may
be hurt.
Warm tips
Do not disassemble the projector at will. This may cause electric
shock and also affect normal warranty.
Do not place any liquid or heavy object on the product.
Projector Knowledge
This projector can support input of HDMI video signal and
composite video signal, as well as input and output of stereo
audio signal. Please connect the projector with other audio and
video equipment according to your needs with reference to the
following diagram.
1. Adjustable leg
9. AV port
2. Remote signal receiver
10. HDMI2 port
3. Lens of the projector
11. Horn
4. Power port
12. Heat dissipation window
5. Infrared remote control
13. Focusing thumbwheel
receiving window
14. Switch of dismountable dust
6. Audio out
7. HDMI1 port
8. USB port
15. Dismountable dust screen
screen (push the switch towards
the right to open the dust screen)

Publicidad

Tabla de contenido
loading

Tabla de contenido