Publicidad
STEP 1
To assemble the bottom mount
slides, attach the slide strap feet to
the slide straps (See Figure 1A).
Attach the left and right slides to
the top of the feet. You will hear/
feel a "snap" when connected
completely (See Figure 1B).
Once slides are assembled, set
them to the side (See Figure 1C).
STEP 2
Find the left and right triggers and
install the triggers on the correct
side using (4) #6 X 1/2" pan head
screws (See Figure 2A & 2B).
Note: Release triggers are side
sensitive and are marked with an
"L" & "R" for Left and Right.
#2
STEP 4
Take the handle and press it down
in the required holes in the front of
the dish storage unit. Use a rubber
mallet to gently tap the handle firmly
in place (See Figure 3).
STEP 5
Use instructions on the template
to complete installation
(See Figure 4).
2
FIGURE1A
FIGURE 1B
FIGURE 1C
FIGURE 2A
FIGURE 3
FIGURE 4
Customer Service: 800-626-1126 | rev-a-shelf.com
FIGURE 2B
Publicidad
