Dsp Software Connection Instructions - Kohlt STIK 12 Manual Del Usuario

DSP software connection instructions

1. List of required materials:
- Computer (Windows system 7-10)
- Router
- Network cable
- CS PRO_1.08 software
Please download it from:
https://www.kohlt-usa.com/stik.%20series.html
- STIK12 SYSTEM
2. Module Preset --- dial to the "user"
3. Connect the router to the module network port and turn on the power.
4. Make the computer connect to the router and open software "CS PRO_V1.0.8"
5. Click the "Refresh"，and Click the "Device List" that appears. After the connection is OK, you can
make initial debugging on this user page.
11