Connection Plate System - Kohlt STIK 12 Manual Del Usuario

Make your initial connections with all the equipment powered off, and ensure that all the
main volume controls are turned completely down.
1) Connect one side of the signal cable at your audio mixer into output left / right (with stereo-Jack
or XLR) and the other side of the cable into the line input (Stereo-Jack) of your active speaker
cabinet.
2) Connect the power cord to mains.
3) Turn on your mixer first, then the active speaker cabinets.
4) Turn up the volume control of the active speaker cabinets.
5) Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control
to manipulate the output level.
6) After using, turn off your stereo power amplifier first, then the mixer.
8

Connection Plate System