General Safety Rules - Black+Decker ASI500 Manual De Instrucciones

20 • ENGLISH
DO NOT RETURN THIS PRODUCT TO THE STORE,
first contact your local BLACK+DECKER office
or nearest Authorized Service Center.
SAVE THESE INSTRUCTIONS
Warning! Read all instructions before operating
product. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
1. Heed all warnings.
2. Follow all instructions.
3. Do not use this apparatus near water.
Keep the case dry at all times.
4. Clean only with dry cloth.
5. Do not block any ventilation openings. Install in
accordance with the manuafacturer's instructions.
6. Do not place near any heat sources such as radiators,
heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
7. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of
the obsolete outlet.
8. Protect the cord from being walked on or pinched
particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
9. Only use attachments / accessories specified
by the manufacturer.
10. Unplug unit when lightning is in the area
or when unit is not in use.
11. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
12. Do not expose to dripping or splashing.
Warning! To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or moisture.
13. Do not operate near flammable materials, fumes
or gases.
14. Do not disassemble product. Incorrect reassembly
may result in a risk of electric shock or fire.
15. Provide adequate ventilation and refrain from placing
items on or around the product during operation.
16. Do not incinerate the battery even if it is severely
damaged or is completely worn out. The battery can
explode in a fire. Check with local codes for possible
special disposal instructions.
17. If any leakage of liquid from the battery cells occurs,
discontinue use immediately and return the battery
to your local BLACK+DECKER Service Center or
authorized service facility.
18. Never attempt to open the battery for any reason.
If the plastic housing of the battery breaks or cracks,
immediately discontinue use and do not recharge.
19. Keep this product out of the reach of children.
20. Since the vibration produced by the inflator may cause
it to "walk", do not operate on a high shelf or other
surface. Operate at ground or bench level only.

GENERAL SAFETY RULES

f Keep work area clean. Cluttered areas and benches
invite injuries.
f Consider work area enviroment. Don't expose
power tools to rain. Don't use power tools in damp or
wet locations. Keep work area well lit. Do not use tool
in presence of flammable liquids or gases.
f Guard against electric shock. Prevent body
contact with grounded surfaces. For example; pipes,
radiators, ranges, and refrigerator enclosures.
f Keep children away. Do not let visitors contact tool
or extension cord. All visitors should be kept away
from work area.
f Store idle tools. When not in use, tools should be
stored in dry, and high or locked-up place — out of
reach of children.
f Don't force tool. It will do the job better and safer at
the rate for which it was intended.
f Use right tool. Don't force small tool or attachment
to do the job of a heavy-duty tool. Don't use tool for
purpose not intended.
f Dress Properly. Do not wear loose clothing or
jewelry. They can be caught in moving parts. Rubber
gloves and non-skid footwear are recommended when
working outdoors. Wear protective hair covering to
contain long hair.
f Use safety glasses. Also use face or dust mask
if operation is dusty.
f Don't abuse cord. Never carry tool by cord or yank
it to disconnect from receptacle. Keep cord from heat,
oil, and sharp edges.
f Secure work. Use clamps or a vise to hold work.
It's safer than using your hand and it frees both hands
to operate tool.
f Don't overreach. Keep proper footing and balance
at all times.
f Maintain tools with care. Keep tools sharp and clean
for better and safer performance. Follow instructions
for lubricating and changing accessories. Inspect
tool cords periodically and if damaged, have repaired
by authorized service facility. Inspect extension cords