Troubleshooting; Service Information - Black+Decker ASI500 Manual De Instrucciones

26 • ENGLISH
PROBLEM
Unit will not start.

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.
For more information about our authorized service centers and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.BlackandDecker-la.com

TROUBLESHOOTING

POSSIBLE CAUSE
12 Volt adapter not connected.
Accessory socket not live.
Main ON/OFF switch not in correct
position.
The fuse in the 12 Volt adapter is
blown.
Cord or switch is damaged.
POSSIBLE SOLUTION
Connect the 12 Volt adapter.
Turn key to accessory position.
Turn main switch to required position.
Replace the fuse with one of the same
size and type (8A/250V).
Have cord or switch replaced at
BLACK+DECKER Service Center or
Authorized Servicer.