Intended Use; Using For The First Time; Setting Up The Kettle; Operation - Exquisit WK3102 swi Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34

8.3 Intended use

The appliance is intended exclusively for
heating water. The kettle is intended
exclusively for use in private households
and is not suitable for commercial use.
Use the kettle only as described in this
instruction manual. Any other
form of use does not constitute an
intended use and can result in material
damage or even personal injury.
The manufacturer or dealer accepts no
liability for damage or injury resulting
from improper use or use for other than
the intended purpose.

9 Using for the first time

Checking the kettle and scope
of delivery
If you open the packaging carelessly
with a sharp knife or other pointed
objects, the kettle may be damaged.
• Remove the kettle from the
packaging.
• Check that the delivery is
complete.
• Check the kettle and all the
individual parts for damage.
If this is the case, do not put the kettle
into operation. Contact the service
address provided.

Setting up the kettle

• Remove all protective films.
• Unwind the mains power cable
from the cable winder.
• Guide the cable through the recess
for the mains power cable.
• Place the base on a flat and stable
surface.
• Place the water container on the
base.
• Insert the mains plug into a socket
with protective contacts.

10 Operation

WARNING
DANGER OF SCALDING
AND BURNS!
The kettle gets hot during operation and
hot steam escapes, so you may get
burned or scalded!
If the cover is not closed properly when
the kettle is turned on, the kettle cannot
turn off automatically and the hot water
may boil over.
Never touch the hot parts of the kettle.
• Only pick up the kettle using the
handle. Also point out the dangers
to other users!
• Keep away from escaping water
vapour.
• Note that hot steam may escape
from the kettle even after it has
been switched off!
• Always close the cover before
turning on the kettle. Make sure
that the cover audibly engages
and is locked.
• Always keep the cover closed
when pouring out the heated
water.
WARNING
Risk of injury and damage!
If you heat too much water in the kettle,
hot water may spurt out of the water
container. If you heat too little water,
the kettle may overheat and be
damaged.
• When filling the water, note that
the water level must be between
MIN and MAX on the level
indicator.
• Press the cover lock button to
open the cover.
• Fill the desired amount of cold
water into the water container.
• Place the water container on the
base.
• Close the cover. Make sure that
the cover audibly engages.
EN
Page | 15

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido