STEP 1: WHAT'S IN THE BOX
1 Webcam with attached USB-C cable
2 Mount clip with removable
mount adaptor
3 User documentation
STEP 2: DETERMINE MOUNT PLACEMENT
Placement to allow one-handed camera
adjustments (using micro-suction pad)
1 Determine the best placement for
your webcam before continuing
2 Wipe the back of your monitor to clear
any dust or dirt
3 Remove the protective film from
the micro-suction pad
4 Open the mount fully and place on top
of your monitor, being sure that the pad
of the front clip makes contact with the
front of the monitor
5 Rotate the rear foot down until it makes
contact with the back of the monitor
6 Press the micro-suction pad to the back
of your monitor firmly to create a good
bond
Note:
– The mount adaptor can be removed and reused for
mounting adjustments without leaving residue
– To clean the micro-suction pad, rinse with water
to remove debris, and let it air dry in order
to regain strong suction
USB-C
4
English