Logitech BRIO 500 Guia De Instalacion página 5

(Optional) Placement without
the micro-suction pad
Slide the removable mount adapter
down to remove it from the webcam foot
Adjust the foot on the mounting clip until
it is flush with the back of your device
and press firmly in place
STEP 3: MOUNT ADAPTOR REMOVAL
AND CLEANING
1 Remove the webcam from mount and gently
peel the adaptor from one corner to remove
2 With a wet finger gently rub the pad clear
of dust and dirt and let the micro-suction pad
air dry completely before remounting (do not
use cloth or tissue to dry)
3 Repeat the monitor placement setup steps
to best deploy your webcam
STEP 4: ATTACH CAMERA TO THE MOUNT
Place the webcam into the magnet
attachment point on top of the mount
Listen for an audible click indicating the webcam
is properly seated on the mount
5 English