Technical Specifications; Maintenance And Inspection - Beta 3010H 750 Manual De Instrucciones

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
OPERATING MANUAL AND INSTRUCTIONS MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18, 20845, Sovico (MB) ITALY
Original documentation drawn up in ITALIAN.
CAUTION

TECHNICAL SPECIFICATIONS:

MODEL
3010H 750
3010H 1100
WARNINGS:
Do not overload jack stands beyond rated capacity.
Overloading can cause structural damage to jack stands, thereby resulting in severe consequences
Always make sure that the load is placed as perpendicularly as possible to the jack stand,
property damage.
USE:
JACK STAND ADJUSTMENT:

MAINTENANCE AND INSPECTION

and that no cracks, cracked welds or structural damage are shown.
IMPORTANT! READ THIS MANUAL CAREFULLY BEFORE USING.
FAILURE TO COMPLY WITH THE SAFETY
STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY.
MAX. CAPACITY
15t
15t
MIN. HEIGHT MAX. HEIGHT
450 mm
650 mm
BASE
DIMENSIONS
750 mm 300x300 mm
1100 mm 300x300 mm
EN I
3