Artecristal KHAI Manual De Instrucciones página 11

INSTALLATION OF THE TOILET
INSTALLATION OF THE CISTERN
1. Visualize which position of the medium holes will
be the most suitable for the placement of the filling
mechanism. Place the plug with its washer and
thread in the opposite hole.
2. Place the water inlet device in the same way.
Please, check for any leaks after installation. Once
the nut is tightened, the installation hole of the
ceramic can become distorted and could cause
leakage.
For a correct installation of this mechanism, the
critical filling level should be at least 25 mm above
the overflow valve.
3. Place the discharge mechanism in the central
hole. After adjusting it with the nut, cover it with the
rubber provided.
4. Finally install the fixing kit of the tank and adjust
it with its respective washers and nuts once the
cistern is placed on the seat.
1.
2.
3.
4.
Installation
EN