Operating instructions
1. Clock Setting
When the microwave oven is electrified, the screen will display "0:00", buzzer will
ring once.
1) Press " Reloj /Tiempo cocción" once, the hour figures will flash.
2) Turn "
" to adjust the hour figures, the input time should be within 0--23.
3) Press "Reloj /Tiempo cocción", the minute figures will flash.
4) Turn "
" to adjust the minute figures, the input time should be within 0--59.
5) Press "Reloj /Tiempo cocción" to finish clock setting. ":" will flash, and the time
will light.
Note: 1) If the clock is not set, it would not function when powered.
During the process of clock setting, if you press "2) Stop/Cancelar",
the oven will go back to the previous status automatically.
2. Microwave Cooking
Press "Microondas" the screen will display "P100". Press "Microondas" for times
or turn "
" to choose the power you want, and "P100", "P 80", "P 50", "P 30" or
"P 10" will display for each added press. Then press "INICIO/+30SEG./CONFIRM"
to confirm, and turn "
"INICIO/+30SEG./CONFIRM" again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you
can operate the oven as the following steps.
1) Press "Microondas" once, the screen displays "P100".
2) Press "Microondas" once again or turn "
power.
3) Press "INICIO/+30SEG./CONFIRM" to confirm, and the screen displays "P 80".
4) Turn "
" to adjust the cooking time until the oven displays "20:00".
5) Press " INICIO/+30SEG./CONFIRM" to start cooking .
Note: the step quantities for the adjustment time of the coding switch are as
follow:
0---1 min: 5 seconds
1---5 min: 10 seconds
5---10 min: 30 seconds
10---30 min: 1 minute
30---95 min: 5 minutes
" to set cooking time from 0:05 to 95:00. Press
42
" to choose 80% microwave