14. Put the Suction Cups (1) firmly into the top holes and the inside corner plates on the Shelf
Frames (A, B, C, D and E).
TIP: If a suction cup resists insertion, try pressing down on the middle of the cup with the Hex
Wrench while twisting it clockwise into the hole.
15. Place the Glass Shelves (I, J, K, L and M) in place starting with the Bottom Glass Shelf (M).
Make sure that the glass shelf is properly centered and the black side of glass shelf is down.
Push each glass shelf all the way back against the Spine.
NOTE: If a glass shelf is scratched, you can minimize the damage by using a BLACK marker
and filling in scratched area from underneath.
Assembly Instructions
I
J
K
L
M
9
Suction Cup
(20 used in this step)
①