Troubleshooting
If the unit is not charging: Make sure the micro-USB cable is properly connected to the
power input, the power adapter and the power outlet
If the sound is distorted: Try lowering the volume control of your sound source.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower
the bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If you cannot connect your audio device to Party Rocker
•
Have your audio device (e.g., smartphone or tablet) and Party Rocker
together as possible while trying to connect. Make sure both the audio device and Party
TM
Rocker
Max Speaker are unobstructed by walls, furniture, etc.
•
Reset the Bluetooth connection on Party Rocker
from any other audio device and restart the search process. If this does not work right
away, power off Party Rocker Max and then power it back on. See
Connecting with Party Rocker
•
Reset the Bluetooth connection on your audio device by turning Bluetooth off and back
on. You can find this under the Bluetooth menu in the Settings for your phone or other
audio device.
If this does not work, and you have connected to Party Rocker
TM
Rocker
Max in the list of available or previously connected devices in your audio
device's Bluetooth menu, tap the "gear" or "i" icon located next to it and then select
Unpair or Forget. Turn Party Rocker
reappears in your available devices list.
Note: If Party Rocker
within range, you may need to repeat this process with that audio device to fully
disconnect.
If you experience audio dropouts while playing music from a Bluetooth device, this may
be happening because your unit is trying to link to another speaker. This can occur if you
power off a speaker that was linked to your unit or if you have just turned on your unit and it is
TM
in Stereo-Link
mode. To stop the audio dropouts, exit Stereo-Link
pressing the Bluetooth button. Alternatively, you can wait for your unit to link to another
speaker if there is one within range.
If you would like to stop your speaker from automatically linking when you power it on,
make sure you double-press the Bluetooth button to exit Stereo-Link
power it off.
10
TM
Max
for more information.
TM
Max off and back on and try pairing again once it
TM
Max has been paired to another audio device recently that is still
TM
Max via Bluetooth:
TM
Max to disconnect Party Rocker
TM
Max before, find Party
TM
Max as close
TM
Max
Bluetooth
TM
mode by double-
TM
mode before you