• Food may only be stored in its original packag-
ing or in suitable containers.
• Opening the cooling device for long periods
can cause significant increase of the temperature
in the compartments of the device.
• Clean regularly surfaces that can come in contact
with food and accessible drainage systems.
• If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the lid open to prevent mold develop-
ing within the device.
A
NOTICE!
Damage hazard
• Check that the voltage specification on the data
plate corresponds to that of the energy supply.
• Only connect the cooling device to a DC power
supply in the vehicle with the DC cable.
• Never pull the plug out of the socket by the
cable.
• Disconnect the cooling device and other power
consuming devices from the battery before con-
necting a quick charging device.
• Disconnect the cooling device or switch it off
when you turn off the engine. Otherwise you
may discharge the battery.
• The cooling device is not suitable for transport-
ing caustic materials or materials containing sol-
vents.
• Do not use electrical devices inside the cooling
device unless they are recommended by the
manufacturer for the purpose.
• Do not place the cooling device near naked
flames or other heat sources (heaters, direct sun-
light, gas ovens etc.).
• Risk of overheating!
Ensure at all times that there is a minimum of
50 mm ventilation on all four sides of the cooling
device. Keep the ventilation area free of any
objects that could restrict the air flow to the cool-
ing components.
Do not place the cooling device in closed com-
partments or areas with none or minimal air flow.
• Ensure that the ventilation openings are not cov-
ered.
• Do not fill the inner container with ice or fluids.
• Never immerse the cooling device in water.
• Protect the cooling device and cables against
heat and moisture.
• The device shall not to be exposed to rain.
Intended use
The mobile refrigerating appliance is suitable for
cooling and freezing food.
The mobile refrigerating appliance is also suitable
for use on boats.
The mobile refrigerating appliance is designed to
be operated from a DC power supply socket of a
vehicle, boat or caravan.
The mobile refrigerating appliance is suitable for
camping use.
This product is only suitable for the intended pur-
pose and application in accordance with these
instructions.
This manual provides information that is necessary
for proper installation and/or operation of the
product. Poor installation and/or improper operat-
ing or maintenance will result in unsatisfactory per-
formance and a possible failure.
The manufacturer accepts no liability for any injury
or damage to the product resulting from:
• Incorrect assembly or connection, including
excess voltage
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express per-
mission from the manufacturer
• Use for purposes other than those described in
this manual
Dometic reserves the right to change product
appearance and product specifications.
Operation
Scope of delivery: fig. 1
Proceed as shown:
• Connecting to a battery: fig. 2
• Switching on the cooler: fig. 3
• Switching off and storing the cooler: fig. 4
• Fixing the cooler with the safety seat belt: fig. 5
• Fixing the cooler on the vehicle floor: fig. 6
• Selecting the temperature units: fig. 7
11