Ashdown Engineering ABM-EVO IV Manual De Instrucciones página 9

ABM EVO IV
USER GUIDE
The signal from this socket remains when all other outputs from the
amplifier are Muted allowing all sound from the amplifier to be silenced
while tuning is in progress.
LINE OUT -This output socket provides a line level/post Output Level
control signal for connection to an external power amplifier driving
additional speaker cabinets.
OUTPUT LEVEL - The OUTPUT control adjusts the overall level of the
amplifier. Adjust this for your preferred overall stage playing volume.
LINE INPUT - The rear panel has a Line Input socket for connection of
other signal sources into the system. This can be used for plugging a CD,
Tape or MP3 player into the amplifier for practising, rehearsing or for
connection of a second pre-amp into the system.
EFFECTS SEND / RETURN - A serial effects loop is provided at a level of
0dB. The EFFECTS SEND socket can also be used as a Line Out socket
if required as the signal path through the preamp is only broken when a
jack plug is inserted into the EFFECTS RETURN socket.
The EFFECTS SEND is situated after the EQ, the Valve section the
Compression and the Sub Bass Processor.