Withings WBS12W Guía De Producto página 4

How to use Withings Body Comp and take a first measurement
- Follow the information in the Quick Start Guide and in the Withings application to set-up your device.
- To wake up your device for the first time, please pull the tab in the battery cover. If there is no tab, press the power button for 3
EN
EN-US
seconds if needed. Once your product is installed and configured, it will appear in your Devices list in settings.
FR
- To take the first measurement, step on the scale with bare feet. Your name, or trigram (as configured in the app), will appear
DE
on the scale's screen at the end of the weight measurement: it means your scale has correctly identified you and the measurements
ES
sequence (as defined in the app) will follow.
IT
- If it is not the case, the measurement will most likely appear in "Unknown Measurements" in the application. Please assign
SV
it to your user so that the scale can automatically recognize the user during the next weigh-in.
NL
FI
DA
Troubleshooting — Withings Body Comp
IT
ES
If you cannot fix the problem using the following troubleshooting instructions, please contact Withings or go to: withings.com/support
CS
PL
Problems
PT
RO
Scale does not wake up when I step on it.
HU
SK
I'm having syncing issues with my scale.
ET
EL
IS
LV
LT
SL
TR
BG
HR I want to change the units of my scale
(lb, kg, st lb).
Solutions
- Make sure your Withings Body Comp has functional alkaline
batteries. Change the batteries if necessary.
- Make sure that your Withings Body Comp appears in Devices in the Withings App.
If not, please install it.
- Make sure your Withings Body Comp has functional alkaline batteries.
Change the batteries if necessary..
- If your Withings Body Comp is configured with Wi-Fi, make sure your router is plugged in,
that your Wi-Fi is operational, and that the scale is in range of your router.
- If necessary, reboot your scale by removing a battery.
- If necessary, reboot your mobile phone.
- Press the button located on the back side of your scale.
- Press the button again to make the arrow point towards the right unit.
- Press the button once more and maintain it until the charging bar
is complete.