Installing The Product - EDMA 260355 Instrucciones De Uso Y Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2.2. Installing the product

1) Position the bench on the side so that the feet
can be spread out.
3) Deploy the 2nd foot in the same way.
5) Lock the feet with the 2 hooks on each side of the bench.
2.3. Instructions for use
 Always read the manual before use.
 Do not modify the design of the Drywall Bench.
 Visually inspect the product before use.
 Make sure that the Drywall Bench is suitable for the task at hand.
 The surfaces on which the product rests must be horizontal and not slippery, do not use the Drywall
Bench on uneven ground.
 All feet must rest on the ground. Prohibited positions : M-position, upside-down position.
 Take precautions to prevent unauthorised persons from using the product.
 Wear shoes that provide secure support. Do not exceed the maximum total load of 150 kg (including
user and any "equipment").
 Only one person may stand on the product and must not carry heavy or difficult to handle
equipment.
 Do not attempt to reach a point too far away, the user must have both feet resting on the plate of the
Drywall Bench.
 Do not bend over while standing on the Drywall Bench and avoid any tasks that exert a lateral force
(load).
2) Deploy the foot until you reach the end stop.
4) Place the bench on its feet.
8/20

Publicidad

Tabla de contenido
loading

Productos relacionados para EDMA 260355

Tabla de contenido