EDMA 260355 Instrucciones De Uso Y Seguridad página 9

 Make sure you have locked the feet with the hooks before climbing on.
 Get on and off the product while facing it.
 Do not use the product as handling equipment.
 Never move the Drywall Bench if someone is standing on it.
 Do not climb on the product if you are subject to dizziness or fatigue, or if your health condition does
not allow it.
 Do not use the Drywall Bench as a footbridge.
 Make sure the work area is clear of any bare live electrical conductors.
 Do not spend long periods on the bench without regular breaks.
 Prevent damage to the Drywall Bench during transport, e.g. by tying it down, and ensure that it is
positioned appropriately to prevent damage.
 Do not use the Drywall Bench if it is soiled, e.g. with wet paint, mud, oil or snow.
 Do not use the Drywall Bench outdoors in bad weather: strong wind and or rain/snow.
 For outdoor use caution to the wind.
 When positioning, take into account the risk of collision with the Drywall Bench, e.g. with pedestrians,
vehicles or doors.
 Secure doors (except emergency exits) and windows in the working area if possible.
 Warning: danger fall, electrical hazard. Identify any electrical hazards on the work site, such as
overhead lines or other exposed electrical equipment, and do not use the Drywall Bench if there is an
electrical hazard.
 Use non-conductive Drywall Bench for work to be carried out using electrical power.
9/20