Worx WG549E Traducción De Las Instrucciones Originales página 11

WARNING: The vibration emission value during actual use of the power tool can differ from the de-
clared value depending on the ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials is cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should
also take account of all parts of the operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may significantly reduce the exposure level
over the total working period.
Help to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
WG549E
Battery pack 1(WA3551.1)
Charger 1(WA3760)
Attachments
/
(WA4091)
We recommend that you purchase your accessories from the same store that sold you the tool. Choose the
type according to the work you intend to undertake. Refer to the accessory packaging for further details.
Store personnel can assist you and offer advice.
Cordless Li-Ion Blower/Sweeper
C or less.
o
WG549E.3 WG549E.4
1(WA3553) 2(WA3551.1)
1(WA3860) 1(WA3760)
/ /
WG549E.5 WG549E.6
1(WA3551.1) 1(WA3551)
1(WA3860) 1(WA3760)
/ 1
WG549E.9
11
/
/
/
EN